|
How Your Setup Effects Ball Flight - By Glen Richard The simple fact of the matter is that there are only three primary factors that influence where the ball goes and how it gets there. First, the angle of the club face with regard to the golf ball at the time of impact, and secondly, the path the club head is on at the time of impact. Lastly, the energy the club head imparts to the backside of the golf ball. You have heard these factors before. It is true that there are additional external factors that contribute to the end result…wind, hardness of the ground, length of the grass and a few others. These external factors are for the most part out of your control. You can compensate for them if you have sufficient skills. You can purposely fade or draw the golf ball into a sideways wind. You can purposely hit a ball lower than usual to compensate for a headwind. I am going to share something with you now that may surprise you. These shots, contrary to many amateurs’ belief, do not require more skill than your basic straight shot down the middle. In fact, I would argue that it is indeed more difficult to hit a straight shot than it is one that moves left or right. Here’s the bottom line. A ball spinning clockwise will move left to right. Conversely, spin the ball counter-clockwise and it moves right to left. You don’t need to be a genius to understand the physics behind that. You just need to know how to put either a clockwise or counter-clockwise sidespin on the ball. You can do it with a driver, fairway wood or any iron. You don’t even really need to change your swing in any way. How easy can this be? Now I’m not going to mislead you. You CAN modify your swing somewhat to enhance the probability of success, but it is certainly not necessary. At Customgolfsetup have shown many hundreds of golfers how to draw the golf ball at will. There is no magic associated with it whatsoever. Have you ever known a person that draws every iron shot; in fact, they can only draw the ball? I have known several of them. It is so easy for them to draw the ball, they can’t hit the ball straight or fade it. So let’s dispose of the notion that drawing the golf ball requires some significant amount of training or special skills. It just doesn’t. At Custom Golf Setup, we show people how to draw a golf ball, how to fade the ball and how to hit it straight. It’s not a cookbook solution. It’s different for each person and depends on a person’s physical attributes, swing methods, golf clubs and golf balls they prefer. We use an experimental design method that results in a unique solution for each golfer. Period. While that sounds complex, it isn’t. If you are an everyday golfer who wants an inexpensive way to learn how to make the golf ball go in the direction desired, check us out. We will be very happy to provide details on our website that you will see below. There are 2 options: Option 1: An ebook that will show you how to analyze the results yourself. Tap here to see the ebook option Option 2: My team will perform a custom, in-depth engineering analysis on your setup. Tap here to get the full-blown engineering analysis I have combined 2 tips into this e-mail because they are fairly short. To give "The Simple Golf Swing" System a trial run just tap here http://www.golfswingguru.com. I am
also providing "The
Simple Chip" for a limited time at no extra cost. You won't
believe how easy this method makes one of the toughest shots in
the game. The most important aspect of putting is to decide on your line before the stroke. The only thing to be thinking DURING the stroke is how hard you need to hit the ball. Control how far the ball rolls by controlling the distance you bring the putter back during the backswing. The length of the forward swing past the ball should ALWAYS match the length of the backswing. When determining the "line" for the putt, pay particular attention to the lay of the green within a three foot radius around the cup, as your golf ball will be rolling fairly slowly, and therefore will break more sharply within that area near the cup. You need to determine where you want the golf ball to be when it is entering that three-feet-away radius. Always attempt to putt the ball so it will go about one foot past the hole if it misses. If it misses, watch the break PAST the hole, because that will give you the line for the tap in.
Sand play around the green really is a different concept. Here's all you need to know to have great sand play...Open the blade of your sand wedge so that it is directed about five feet to the RIGHT of the flag. Open your stance so the tips of your feet and shoulders are aligned with each other such that you are aiming about five feet LEFT of the pin. When you swing back, only swing the clubhead as HIGH as your right shoulder. Don't use more than about 60% power on the swing. The clubface should slice ACROSS AND DOWN THROUGH the sand, behind the ball. More than any other shot on the course, follow through is essential to lift the ball out of the sand. If you want the ball to stop more quickly, hit the sand about 1 inch behind the middle of the golf ball. If you want the ball to run, you need to hit about 2.5 inches behind the middle of the ball. Use this method and your days of poor sand play are behind you, but of course nothing comes without practice. Find a course in your area that has a chipping green with a bunker you can practice out of. After a while, your confidence will skyrocket. To order tap here. http://www.golfswingguru.com |
 |
